SPC Performance Rear Toe Bolt - 12 mm x 1.5 Thread - Zinc - GM 2010-25 KAW103BCB Heavy Duty Battery Clamps and

Heavy Duty Battery Clamps and Cables: The clamps are specially designed and manufactured for XS Power to easily clamp on the external battery studs of race vehicles

1967-1986 Pontiac Bonneville

Ignition Tune Up Kit

Not For Use On Pollution Controlled Vehicles

Flow rate: 1-2 gpm Working pressure: 60 psi (max) Temperature range: 265 degrees F constant Power: 12V DC

SPC Performance Rear Toe Bolt - 12 mm x 1.5 Thread - Zinc - GM 2010-25 KAW103BCB Heavy Duty Battery Clamps andReplace the factory torque to yield (TTY) rear camber and toe bolts on GM's Epsilon II platform with these hex chromate free 700 hour salt spray tested cam bolts from SPC. GM's hardware is TTY and needs to be replaced with every alignment. SPC's hardware can be re torqued in future alignments, so you will only need to replace them once. This kit is sold per wheel and gives you the same adjustment range as the factory cam, + 2. 0deg toe change.