3/8" ID x 10' Flexible Rubber Air Hose 300 PSI 1/4" MPT x 1/4" MPT CYLINDER HEAD c038-sqk-sske-s70 or afke038b3

c038-sqk-sske-s70 or afke038b3

The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode

1" FPT polypropylene bulkhead for tank pipe thread connection this is commonly used on the inlet of the Hudson or a pressure washer supply tank

The wall is a little thicker than some of the other manufacturers out there that we have seen

Do not hard pipe plumb this filter

3/8" ID x 10' Flexible Rubber Air Hose 300 PSI 1/4" MPT x 1/4" MPT CYLINDER HEAD c038-sqk-sske-s70 or afke038b33 8" ID x 10' flexible rubber air hose 300 psi 1 4" MPT x 1 4" MPT (Suitable for 1 2 ALL Flo, Yamada, ARO, Ingersoll Rand, 1 2" air diaphragm pump or pump with a 1 4" air port). If your pump has a 1 4" port, always upsize the air hose id at least one size up. We recommend a desiccant filter after the regulator and before the pump. Straight end and elbow end. Install the elbow end at the pump. Hose is 10' in length. SKU: HA06 10