2072 ROUNDOVER & EDGE TRIM 1/2" Shank a 5/8" x 22-1/2" Roughing

a 5/8" x 22-1/2" Roughing Gouge and a 3/8" x 19" Spingle Gouge

You can install and remove our insert rings with a quick turn of our two-prong insert ring wrench

Just set your desired pressure by turning the thumbscrew for more or less pressure

marring cap and swivel pad

Double windows allows you to check both tension & tracking while the machine is running

2072 ROUNDOVER & EDGE TRIM 1/2" Shank a 5/8" x 22-1/2" Roughing1 2"SH, 1 4"R, 1 1 8"LD, 1 2"SD Product Description Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the traditional roundover edge on the side of your workpiece.