Ridgid 35855 Pipe Tap-NPT Enerpac parts This set of dies can

This set of dies can handle a rod size-TPI of 1-Inch to 8-Inch

Classified to UL 1976 with connectors and wire that Comply with the requirements of UL 486a-486b | Dies clearly marked with Color codes to easily match with proper lug | Hex crimp profile | Capacity: #6 AWG | For use with aluminum

46705 PLUG

65680 Diehead

This saw features carbide-tipped blades to cut different materials and geometric configurations without cutting fluid

Ridgid 35855 Pipe Tap-NPT Enerpac parts This set of dies canFeatures a drill size of 213 64" and works on 2" pipe sizes, along with a taper of 3 4" per foot. 3 4 in. 40 psi (2. 8 bar) regulator for medium flow (yellow label) Can be installed above or below the ground Preset outlet pressures: 30 psi (2,0 Bars), 40 psi (2,8 Bars) 3 4 in. (20 27) female threaded inlet and outlet