Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" - 5" Diameter

- 5" Diameter

they are sanded smooth and then oiled for protection

The other skids are for 4”

Good for 10-20 gpm and 800 to 2000 psi operating pressure

Note: Grit Catchers sizes 18" and 24" are nonrefundable

Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" - 5" DiameterThis tool you can use to push, pull or turn the rods. You can slide this tool right over the rod and it will slip over the coupling to allow you to push or pull the sectional rods. Insert the pin through the center hole of the coupling and you can turn the rods too. This is done with hand rodding. Pick for either your 5 16 or 3 8 rods. Made of steel and zinc plated.